Clarez Creationz

EMO XMAS

2011-12-09T04:18:00.011Z

THIS TUTORIAL WAS WRITTEN BY ME ON DECEMBER 9th 2011, IT ASSUMES YOU HAVE WORKING KNOWLEDGE OF PSP AND ANIMATION SHOP AND ITS TOOLS, ANY RESEMBLENCE TO ANY OTHER TUTORIAL IS PURELY COINCIDENTAL

YOU WILL NEED:

SCRAP KIT 'EMO XMAS' BY KITT WHICH U CAN FIND HERE

MY SUPPLIES HERE

ON TO THE TUTORIAL:

OPEN A NEW TRANSPARENT IMAGE 700 X 700 AND FLOOD FILL WHITE
OPEN EX LIGHTS AND PASTE AS A NEW LAYER

OPEN EX HOLLY FRAME AND PASTE AS A NEW LAYER OVER THE LIGHTS - HIDE BACKGROUND LAYER AND MERGE VISIBLE

USING YOUR MAGIC WAND TOOL CLICK INSIDE THE FRAME - EXPAND - MODIFY - EXPAND 8 - CHOOSE A COLOUR OF CHOICE - ADD NEW LAYER - FLOOD FILL AND DRAG BELOW THE FRAMES

OPEN EX MERRY CHRISTMAS AND PASTE AS A NEW LAYER - POSITION - DROP SHADOW
CLICK INSIDE THE FRAME AGAIN - SELECT WITH YOUR MAGIC WAND - EXPAND - 3
OPEN EX XMAS BOY AND PASTE AS A NEW LAYER - INVERT AND HIT DELETE

CHANGE THE BLEND MODE TO HARD LIGHT AND LOWER OPACITY
OPEN EX DBL BOW AND PASTE AS A NEW LAYER AND POSITION - DROP SHADOW
OPEN EX XMAS GIRL AND PASTE AS A NEW LAYER - POSITION AND DROP SHADOW

ADD 3 NEW LAYERS AND RENAME 1,2 AND 3, PLACE THEM BELOW THE FRAME
OPEN THE SNOW HIGHLIGHT LAYER 1 - PASTE AS NEW LAYER
REPEAT WITH LAYERS 2 AND 3 BUT MOVE THE SNOW

ADD COPYRIGHTS, YOUR MARK AND ANY TEXT
HIDE LAYERS 2 AND 3 - COPY MERGED AND PASTE INTO ANIMATION SHOP
HIDE LAYERS 1 AND 3 - COPY MERGED AND PASTE AFTER CURRENT FRAME
HIDE LAYERS 1 AND 2 - COPY MERGED AND PASTE INTO ANIMATION SHOP AFTER CURRENT FRAME

VIEW ANIMATION AND SAVE AS A .GIF

IF YOU HAVE ANU QUESTIONS PLEASE EMAIL ME

MOHAWK

2011-11-21T04:03:00.010Z

THIS TUTORIAL WAS WRITTEN BY ME ON NOVEMBER 21st 2011, IT ASSUMES YOU HAVE WORKING KNOWLEDGE OF PSP / ANIMATION SHOP AND IT'S TOOLS
ANY RESEMBLENCE TO ANY OTHER TUTORIAL IS PURELY COINCIDENTAL

YOU WILL NEED:

TUBE OF CHOICE, I AM USING THE WORK OF CEI, WHICH YOU CAN GET FROM HERE YOU WILL NEED A LICENCE FROM MPT TO USE THIS WORK
MY SUPPLIES HERE

OPEN A NEW TRANSPARENT IMAGE 700 X 700 - OPEN FRAME1 AND PASTE AS A NEW LAYER - USE YOUR MAGIC WAND AND SELECT INSIDE ALL THE FRAMES - EXPAND - 4 - OPEN PAPER1 AND PASTE AS A NEW LAYER - INVERT AND HIT DELETE - DRAG BELOW THE FRAME IF NOT ALREADY THERE

SELECT THE MAGIC WAND TOOL AND CLICK INSODE THE TOP FRAME - EXPAND 4 - OPEN TUBE AND PASTE AS A NEW LAYER - INVERT AND DELETE

REPEAT THIS STEP WITH THE OTHER FRAMES USING A DIFF PART OF THE BE EACH TIME - DRAG THE FRAME LAYER ABOVE THEM ALL

RENAME THE LAYERS OF THE TUBES 1,2,3,4,5 AND NAME THE FRAME LAYER FRAME

CLICK ON THE BOTTOM LAYER - OPEN PAPER1 AND PASTE AS A NEW LAYER - ADD A MASK OF CHOICE - MERGE GROUP -RESIZE IF NEEDED

ADD THE COPYRIGHTS, YOUR MARK AND ANY TEXT YOU WOULD LIKE
MERGE DOWN THESE WITH THE MAINTUBE AND RENAME TUBE - COPY MERGED AND PASTE INTO ANIMATION SHOP

HIGHLIGHT 1 LAYER - ADJUST COLORIZE - GREY
COPY MERGED AND PASTE INTO ANIMATION SHOP
REPEAT THE ABOVE STEPS WITH 2,3,4,5
VIEW ANIMATION AND SAVE AS A .GIF

IF YOU HAVE ANY QUESTIONS PLEASE EMAIL ME

ALOT OF PINK

2011-11-20T05:09:00.007Z

THIS TUTORIAL WAS WRITTEN ON NOVEMBER 20TH 2011, IT ASSUMES YOU HAVE WORKING KNOWLEDGE OF PSP/ANIMATIO SHOP AND ITS TOOLS
AY RESEMBLENCE TO ANY OTHER TUTORIAL IS PURELY COINCIDENTAL

YOU WILL NEED:

TUBE OF CHOICE, I AM USING THE WORK BY PAULA WHICH YOU CAN GET FROM BRITSYNIN

'XMAS AT MISFITS' SCRAP KIT BY ANNU, WHICH U CAN FIND HERE

ON TO THE TUTORIAL:

OPEN A NEW TRANSPARENT IMAGE 700X700 - FLOOD FILL WHITE
OPEN EL30 AND PASTE AS A NEW LAYER - CLICK INSIDE USING THE MAGIC WAND - EXPAND - 5
OPEN PP2 AND PASTE AS A NEW LAYER - INVERT AND HIT DELETE
DRAG BELOW THE FRAME

CLICK INSIDE THE FRAME AGAIN - EXPAND 5 - OPEN A TUBE OF CHOICE - PASTE AS A NEW LAYER - RESIZE IF NEEDED - INVERT AND HIT DELETE
DRAG BELOW THE FRAME - CHANGE BLEND MODE TO LUMINCANCE LEGACY AND LOWER OPACITY

OPEN MAIN TUBE AND PASTE AS A NEW LAYER - DROP SHADOW AND POSITION
OPEN EL39 AND PASTE AS A NEW LAYER AND DRAG TO THE BOTTOM - DUPLICATE - MIRROR - FLIP - POSITION - MERGE DOWN - DROP SHADOW
OPEN EL26 - RESIZE AND PASTE AS A NEW LAYER - POSITION

OPEN EL14 AND PASTE AS A NEW LAYER - DROP SHADOW
OPEN EL40 AND PASTE AS A NEW LAYER - POSITION
ADD COPYRIGHTS AND YOUR MARK -DELETE BACKGROUND LAYER AND SAVE AS A .PNG

IF YOU HAVE ANY QUESTIONS PLEASE EMAIL ME

Waiting for you

2011-11-16T10:52:00.012Z

THIS TUTORIAL WAS WRITTEN BY ME ON 16th NOVEMBER 2011, IT ASSUMES YOU HAVE WORKING KNOWLEGE OF PSP AND ITS TOOLS
ANY RESEMBLENCE TO ANY OTHER TUTORIAL IS PURELY COINCIDENTAL

YOU WILL NEED:

SCRAP KIT 'XMAS TIME' BY RIEKA WHICH YOU CAN GET HERE

TUBE OF CHOICE, I AM USING THE WORK OF ELIAS CHATZOUDIS, YOU WILL NEED A LICENCE TO USE HIS WORK

TEMPLATE 305 BY MISSY HERE

EYE CANDY 4000 - GRADIENT GLOW

EYE CANDY 5 - TEXTURES

ON TO THE TUTORIAL

OPEN A NEW TRANSPARENT IMAGE 700X700 AND FLOOD FILL WITH WHITE

OPEN FRAME3 FROM THE KIT AND PASTE AS A NEW LAYER, USING YOUR MAGIC WAND CLICK INSIDE THE FRAME - EXPAND - 5 - OPEN PAPER OF CHOICE AND PASTE AS A NEW LAYER - SELECTIONS - INVERT AND DELETE - DEAG THE PAPER BELOW THE FRAME

CLICK INSIDE THE FRAME AGAIN - EXPAND - 5 - OPEN TUBE OF CHOICE AND PASTE AS A NEW LAYER - IVERT AND HIT DELETE - CHANGE BLENND MODE TO SOFT LIGHT AND MERGE THESE LAYERS VISIBLE - DROP SHADOW

OPEN TEMPLATE AND REMOE THE CREDIT LAYER - HIGHLIGHT CIRCLE2 LAYER AND COPY AND PASTE YOUR FRAME IMAGE AS A NEW LAYER - IMAGE RESIZE 85%

HIGHLIGHT CIRCLE2 LAYER AGAIN - SELECTIONS - FLOAT - DELETE LAYER - OPEN A PAPER OF CHOICE AND PASTE AS A NEW LAYER - SELECTINS - INVERT AND HIT DELETE - ADD A SMALL BLACK GRADIENT GLOW

HIGHLIGHT RECTANGLE1 LAYER - FLOAT - ADD A NEW LAYER - FLOOD FILL WITH COLOUR FROM TUBE - APPLY A SWIRL USING EYE CANDY 5 TEXTURE - ADD THE SAME GRADIENT GLOW - DROP SHADOW

HIGHLIGHT CIRCLE1 LAYER - FLOAT - DELETE - ADD A NEW LAYER AND FLOOD FILL WITH COLOUR TO MATCH - ADD GRADIENT GLOW

HIGHLIGHT FRAME1BACKGROUND - FLOAT - OPEN PAPER OF CHOICE AND PASTE AS A NEW LAYER - INVERT - DELETE - DELETE ORIGINAL - GRADIENT GLOW

HIGHLIGHT FRAME2 LAYER - ADJUST AND COLORIZE TO GREY - BRIGHNESS - LIGHTEN TO ALMOST MATCH OTHER FRAME

HIGHLIGHT FRAME2 BACKGROUND - FLOAT - DEFLOAT - DELETE LAYER - OPEN PAPER OF CHOICE AND PASTE AS A NEW LAYER - INVERT AND HIT DELETE

ADD A BLACK GRADIENT GLOW TO BOTH FRAME

ADD A WHITE GRADIENT GLOW TO THE WORD ART

ADD ANY ELEMENTS YOU WISH TO THE TAG

MOVE THE WORD ART DOWN A BIT - DROP SHADOW

ADD MAIN TUBE - DROP SHADOW - ADD COPYRIGHTS AND YOUR MARK - DELETE BACKGROUND LAYER AND RESIZE IF NEEDED - SAVE AS A .PNG

IF YOU HAVE ANY QUESTIONS PLEASE EMAIL ME

Snowboard

2011-11-12T07:18:00.010Z

THIS TUTORIAL WAS WRITTEN BY ME ON NOVEMBER 12TH 2011
ANY RESEMBLENCE TO ANY OTHER TUTORIAL IS PURELY COINCIDENTAL
IT ASSUMES YOU HAVE WORKING KNOWLEDGE OF PSP AND ANIMATION SHOP AND ITS TOOLS

YOU WILL NEED:
SCRAP KIT 'SNOWBOARD' BY MELISSA WHICH YOU CAN GET HERE
TUBE OF CHOICE, I AM USING THE WORK OF KEITH GARVEY AND YOU WILL NEED A LICENCE TO USE HIS WORK

ON TO THE TUTORIAL:

OPEN A TRANSPARENT IMAGE 700X700 AND FLOOD FILL WHITE
SELECT YOUR SELECTION TOOL SET TO CIRCLE AND DRAW OUT A CIRCLE
OPEN A PAPER OF CHOICE AND PASTE AS A NEW LAYER - SELECTIONS S- INVERT AND HIT DELETE

SELECTIONS - FLOAT - EXPAND - 5 ON THE CIRCLE
OPEN ANOTHER PAPER OF CHOICE AND PASTE AS A NEW LAYER
INVERT AND DELETE
MERGE THESE 2 LAYERS TOGETHER AND POSITION TOP LEFT OF YOUR IMAGE

DRAW ANOTHER CIRCLE A BIT SMALLER AND REPEAT THE ABOVE STEPS USING DIFFERENT PAPERS
SELECT THE BIGGER CIRCLE AND FLOAT - OPEN THE CLOSE UP TUBE AND PASTE AS A NEW LAYER - POSITION - INVERT AND HIT DELETE

REPEAT WITH THE OTHER CIRCLE USING A DIFFERENT TUBE
CHANGE THE BLEND MODE OF BOTH THE TUBES TO OVERLAY
HIDE THE BACKGROUND LAYER AND MERGE LAYERS VISIBE - UNHIDE BACKGROUND
OPEN THE BLACK BOW FROM THE KIT AND PASTE AS A NEW LAYER - DROP SHADOW
DROP SHADOW CIRCLES

OPEN THE SEQUINS AND PASTE AS A NEW LAYER AND DRAG TO THE BOTTOM - DUPLICATE TWICE AND POSITION BEHIND THE CIRCLES - MERGE SEQUINS TOGETHER - DROP SHADOW
OPEN THE SNOWFLAKE AND POSITION - DROP SHADOW

OPEN A PAPER OF CHOICE AND PASTE ABOVE THE WHITE BACKGROUND - APPLY A MASK
CLICK ON THE SNOWFLAKE LAYER AND RENAME 'SNOWFLAKE' DUPLICATE TWICE AND RENAME THEM 1,2 AND 3
HIGHLIGHT SNOWFLAKE1 AND ADD A NOISE OF CHOICE 30%
HIGHLIGHT SNOWFLAKE 2 AND ADD NOISE 40%
HIGHLIGHT SNOWFLAKE 3 AND ADD NOISE 50%

OPEN THE THRILL WORD ART AND PASTE AS A NEW LAYER - DROP SHADOW
ADD ANY TEXT YOU LIKE - WATERMARK AND COPYRIGHTS
CROP AROUND THE TAG AND RESIZE 85% ALL LAYERS

HIDE SNOWFLAKE 2 AND 3 - COPY MERGED AND PASTE INTO ANIMATION SHOP
UNHIDE
HIDE SNOWFLAKE 1 AND 3 - COPY MERGED AND PASTE AFTER CURRENT FRAME
UNHIDE
HIDE SNNOWFLAKE 1 AND 2 - COPY MERGED AND PASTE AFTER CURRENT FRAME
VIEW ANIMATION AND SAVE AS A .GIF

IF YOU HAVE ANY QUESTIONS PLEASE EMAIL ME

PURPLE XMAS

2011-11-10T10:05:00.011Z

THIS TUTORIAL WAS WRITTEN BY ME ON NOVEMBER 10TH 2011, IT ASSUMES YOU HAVE WORKING KNOWLEDGE OF PSP AND IT'S TOOLS.

ANY RESEMBLENCE TO ANY OTHER TUTORIAL IS PURELY COINCIDENTAL

YOU WILL NEED:

TUBE OF CHOICE, I AM USING THE WORK OF RION VERNON FROM PINUP TOONS, YOU WILL NEED A LICENCE TO USE HIS WORK

SCRAP KIT 'A MISFIT XMAS' BY TINA .. HER SITE

ON TO THE TUTORIAL...

1. OPEN A NEW TRANSPARENT IMAGE 200 X 500

2. FLOOD FILL WITH A COLOUR FROM YOUR TUBE

( YOU CAN USE A GRADIENT IF YOU PREFER)

3. IMAGE - RESIZE - 50% - IMAGE -ROTATE - 90 - LEFT AND POSITION TO THE LEFT OF YOUR IMAGE

4. ADD A DROP SHADOW OF CHOICE

5. OPEN ABOUT 3 OR TUBES FROM THE SAME ARTIST AND POSITION THEM ON THE IMAGE - POSITION THEM WHERE YOU LIKE - WHEN HAPPY MERGE THEM TOGTHER AND CHANGE THE BLEND MODE TO LUMINANCE LEGACY AND LOWER THE OPACITY TO AROUND 75

6. GO TO EFFECTS - TEXTURE EFFECTS - BLINDS, WITH THESE SETTINGS: 2,28,BLACK

7. USING YOUR FREEHAND SELECTION TOOL SET TO RECTANGLE DRAW OUT A RECTANGLE AT THE BOTTOM RIGHT - HIGHLIGHT THE TUBE LAYER AND CHANGE TO GREY - REPEAT WITHT HE BACKGROUND LAYER

8. SELECTIONS - CONTRACT - 5 - ADJUST BRIGHTNESS A LITTLE BIT

9. DRAW ARUND THE GREY AREA - SELECTIONS - BORDER - 2 - ADD A NEW LAYER AND FLOOD FILL WITH A COLOUR FROM TUBE - SELECT NONE

10. ADD A PAPER TEXTURE OF CHOICE TO THE BACKGROUND

11. MERGE VISIBLE AND MINIMISE

12. OPEN A NEW TRANSPARENT IMAGE 700 X 700 AND PASTE WHAT YOU JUST MADE ONTO IT

13. OPEN LIGHTS AND PASTE AS A NEW LAYER - ERASE ANY OVER HANGS EACH EDGE

14. OPEN SNOWFLAKE1 AND PASTE AS A NEW LAYER AND DRAG TO THE BOTTOM - POSITION TO THE LEFT OF THE TAG - DUPLICATE - MIRROR - FLIP

15. MERGE THESE 2 TOGETHER AND ADD A DROP SHADOW OF CHOICE

16. ADD A NEW LAYER AND DRAG TO THE BOTTOM AND FLOOD FILL WHITE

17. HIGHLIGHT THE RECTANGLE LAYER - SELECTIONS - SELECT ALL - SELECTIONS - FLOAT - DELECTIONS DEFLOAT - MODIFY EXPAND - 7 - ADD A NEW LAYER AND FLOOD FILL WITH A COLOUR FROM YOUR TUBE

18. ADD NOISE OF CHOICE - DROP SHADOW

19. OPEN SPARKLE1 AND PASTE AS A NEW LAYER

20. ADD TEXT OF CHOICE - WATERMARK - COPYRIGHT

21. HIGHLIGHT THE LIGHTS LAYER AND - DUPLICATE TWICE - RENAME THEM LIGHTS 1,2 AND 3

22. HIGHLGHT LIGHT 1 AND WITH YOUR FREEHAND SELECTION TOOL DRAW AROUND THE BULB OF THE 1ST, 4TH, 7TH, 10TH AND 13TH LIGHT

23. ADJUST BRIGHTNESS - 80 - SELECT NONE

24. HIGHLIGHT LIGHT 2 AND WITH YOUR FREEHAND SELECTION TOOL DRAW AROUND THE BULB OF THE 2ND, 5TH, 8TH, 11TH

25. ADJUST BRIGHTNESS - 80 - SELECT NONE

26. HIGHLIGHT LIGHT3 AND WITH YOUR FREEHAND SELECTION TOOL DRAW AROUND THE BULB OF THE 3RD, 6TH, 9TH AND 12TH

27. ADJUST BRIGHTNESS - 80 - SELECT NONE

28. CROP AROUND YOUR TAG AND RESIZE IF NEEDED

29. HIDE LAYERS LIGHTS 2 AND 3 - COPY MERGED AND PASTE INTO ANIMATION SHOP

31. UNHIDE

31. HIDE LAYERS 1 AND 3 AND COPY MERGED AND PASTE INTO ANIMATION SHP AFTER CURRENT FRAME

32. UNHIDE

33. HIDE LAYERS 1 AND 2 AND PASTE INTO ANIMATION SHOP AFTER CURRENT FRAME

34. CHANGE THE FRAME PROPERTIES TO 30 - VIEW ANIMATION AND SAVE AS A .GIF

IF YOU HAVE ANY QUESTIONS REGARDING THIS TUTORIAL, PLEASE EMAIL ME

DARK OF THE NIGHT

2011-10-13T06:40:00.014+01:00

THIS TUTORIAL WAS WRITTEN BY ME ON OCTOBER 13TH 2011, ANY RESEMBLENCE TO ANY OTHER TUTORIAL IS PURELY COINCIDENTAL, I USED PSP VERSION 9 TO WRITE THIS, IT ASSUMES YOU HAVE WORKING KNOWLEDGE OF PSP AND OR ANIMATION SHOP AND IT'S TOOLS

YOU WILL NEED:

SCRAP KIT 'DARKOFTHENIGHT' WHICH YOU CAN DOWNLOAD FROM GOTHIC INSPIRATIONS HERE

TUBE OF CHOICE, I AM USING THE WORK OF ELIAS CHATZOUDIS, YOU WILL NEED A LICENCE TO USE HIS WORK FROM PTE HERE

MY SUPPLIES HERE

ON TO THE TUTORIAL

OPEN UP A NEW BLANK CANVAS 700 X 700 ( RESIZE LATER ) - FLOOD FILL WHITE

OPEN FRAMEBLUE3 AND PASTE AS A NEW LAYER - ROTATE - LEFT - 90

IMAGE - RESIZE - 60% - ALL LAYERS UNCHECKED

ROTATE - LEFT - FREE - 18 - DUPLICATE - MIRROR AND POSITION

USING YOUR MAGIC WAND CLICK INSIDE ONE OF THE FRAMES AND DELETE THE OVERLAP FROM THE OTHER

USING YOUR FREEHAND SELECTION TOOL SET TO POINT TO POINT DRAW AROUND THE FRAME AT THE BOTTOM - OPEN A PAPER OF CHOICE AND PASTE AS A NEW LAYER - SELECTIONS - INVERT AND HIT DELETE - DRAG THE PAPER BELOW THE FRAME

REPEAT WIH THE OTHER FRAME USING A DIFFERENT PAPER

OPEN NECKLASE AND RESIZE 60% - COPY AND PASTE AND POSITION OVER THE LEFT FRAME - DELETE ANY CHAIN HANGING OVER THE EDGE - DROP SHADOW OF CHOICE

OPEN RIBBONWRAP2 - RESIZE 75% AND PASTE AS A NEW LAYER - USE YOUR DEFORM TOOL TO ROTATE IT SO IT FITS ACROSS THE BOTTOM FRAME - DROP SHADOW OF CHOICE

SELECT YOUR MAGIC WAND AND CLICK INSIDE THE BOTTOM FRAME - OPEN PENTAGON AND PASTE AS A NEW LAYER - SELECTIONS - INVERT AND HIT DELETE - DRAG PENTAGON BELOW THE RIBBON

REPEAT WITH THE OTHER FRAME AND DRAG PENTAGON BELOW THE CHAIN

SET BOTHE THE PENTAGON BLEND MODES TO SOFT LIGHT

OPEN UP SWIRL DESIGN 2 - RESIZE 90% - AND PASTE AS A NEW LAYER AND DRAG TO THE BOTTOM - DUPLICATE - MIRROR - FLIP AND POSITION OTHER SIDE - MERGE TOGETHER AND ADD A DROP SHADOW OF CHOICE

OPEN YOUR TUBE OF CHOICE AND POSITION - DROP SHADOW

ADD THE COPYRIGHTS - TEXT- AND YOUR MARK

RESIZE ALL LAYERS 80%

COPY MERGED AND PASTE INTO ANIMATION SHOP - DUPLICATE UNTIL YOU HAVE 13 FRAMES - OPEN THE SPIDER

ADD THE SPIDER TO THE TAG - CHANGE SPEED ACCORDINGLY AND SAVE AS A .GIF

IF YOU HAVE ANY QUESTIONS REGARDING THIS TUTORIAL PLEASE EMAIL ME

TIS NEAR HALLOWEEN

2011-10-11T08:11:00.016+01:00

THIS TUTORIAL WAS WRITTEN BY ME ON OCTOBER 11TH 2011, ANY RESEMBLENCE TO ANY OTHER TUTORIAL IS PURELY COINCIDENTAL, I USED PSP VERSION 9 TO WRITE THIS, IT ASSUMES YOU HAVE WORKING KNOWLEDGE OF PSP AND OR ANIMATION SHOP AND IT'S TOOLS.

YOU WILL NEED

TEMPLATE 108 BY KRISTEN WHICH YOU CAN GET FROM HERE

TUBE OF CHOICE, I AM USING THE WORK OF ELIAS CHATZOUDIS, YOU WILL NEED A LICENCE TO USE HIS WORK FROM HERE

SCRAP KIT 'TRICK OR TREAT' BY KITZ WHICH CAN BE DOWNLOADED FROM HERE

EYE CANDY 4000 - GRADIENT GLOW

ON TO THE TUTORIAL

OPEN THE TEMPLATE - DUPLICATE - CLOSE ORIGINAL

IMAGE - CANVAS SIZE - 700X700 - DELETE COPYRIGHT LAYER

OPEN YOUR TUBE AND CHOOSE A COLOUR WITH YOUR COLOUR PICKER TOOL

HIGHLIGHT FRME LAYER - SELECTIONS - SELECT ALL - FLOAT - DEFLOAT - FLOOD ADD A NEW LAYER -FILL WITH THE COLOUR YOU CHOSE

DELETE THE ORIGINAL LAYER

HIGHLIGHT GRID BACKGROUND LAYER - COLORIZE TO A COLOUR TO MATCH

REPEAT WITH WORDART

ADD A SMALL BLACK GRADIENT GLOW TO THE WORD ART

HIGHLIGHT THE PUMPKIN LAYER - FLOAT - DEFLOAT - ADD A NEW LAYER AND FLOOD FILL WITH A COLOUR THAT MATCHES - DELETE ORIGINAL LAYER

HIGHLIGHT FRAME LAYER AND CLICK INSIDE USING YOUR MAGIC WAND - SELECTIONS - MODIFY - EXPAND 2

OPEN AND COPY YOUR TUBE AND DUPLICATE TWICE - POSITION INSIDE THE FRAME - MERGE THE TUBE LAYERS TOGETHER - SELECTIONS - INVERT AND HIT DELETE - CHANGE THE BLEND MODE TO HARD LIGHT

LOWER THE OPACITY TO AROUND 70

OPEN THE TUBE AGAIN AND MIRROR AND PASTE AS A NEW LAYER - DROP SHADOW OF CHOICE

OPEN THE COBWEBS FROM KIT AND COPU AND PASTE AS A NEW LAYER AND DRAG ABOVE THE BACKGROUND LAYER - DUPLICATE - IMAGE - FLIP - MIRROR - MERGE TOGETHER

OPEN SPIDER FROM KIT AND PASTE AS A NEW LAYER - RESIZE - 49% AND POSITION - DROP SHADOW

OPEN WITCHES CAT - RESIZE - 49% AND POSITION

OPEN TAG2 AND RESIE - ROTATE - DROP SHADOW

ADD YOUR COPYRIGHTS - YOUR MARK - AND TEXT

CROP AROUND THE TAG - RESIZE - DELETE WHITE BACKGROUND - SAVE AS A .PNG

IF YOU HAVE ANY QUESTIONS REGARDING THIS TUTORIAL PLEASE EMAIL ME

Chillax

2011-07-09T10:47:00.010+01:00

This tutorial was written by me on 9th July 2011

It assumes you have working knowledge of PSP and Animation Shop and it's tools,
was written in Version 9, feel free to merge layers as when needed, unless otherwise stated

You will need:

template107 by yvette ( I have supplied this as i cannot find her blog for you to d/load, if you know where the blog is, please let me known on comments below so that I can add the link, thank you)
Tube of choice, I am using the work of Elias Chatzoudis and you will need a licence to use his work from PTE
Scrap Kit 'Punkette' by kristin which you can d/load here
eye candy 4000 - gradient glow
my supplies here

On to the tutorial

Open the template and duplicate and close the original
image / canvas size / 700 x 700 and we will resize later
unhide the background and delete the copyright layer and also the text layer

highlight black circle layer / float / defloat / open a paper of choice and paste as a new layer / invert and hit delete / delete the original layer
repeat the above with the pink circle, choosing another paper
repeat again with large pink rectangle

repeat again with small pink rectangle
highlight the small rectangle / float / defloat / open tube of choice and paste as a new layer and position / invert and hit delete change the blend mode to overlay
repeat with the white rectangle using a different part of the tube but change blend mode to luminance legacy

highlight the circle layer / float / defloat and again paste your tube / change blend mode to dodge / delete the brush layer
highlight the large circle layer and add a small gradient glow of choice with black
repeat with the other circle

click on the top layer and paste the burst as a new layer and position where you like
delete any bursts that appear over the rectangle layers
open a splat of choice from the kit and paste as a new layer and drag to the bottom / duplicate / mirror / flip and merge visible these 2 layers

merge down the dotted rectangle and black rectangle and move down a bit if using same tube as me
paste the main tube as a new layer and erase any of the rectangle thats showing underneath it / drop shadow main tube
add any more elements you wish to from the kit

when happy delete the background layer / merge visible add the copyrights and your mark and save as a .png

Template117

2011-07-02T07:52:00.001+01:00

You can download this here

Template116

2011-07-02T07:50:00.001+01:00

you can download this here

LINKS

2011-06-20T13:17:00.000+01:00

I SEEM TO HAVVE LOST ALOT OF MY SUPPLY LINKS...
IF THERE IS ANY YOU WANT IN PARTICULAR, PLEASE EMAIL ME AT
clare_33@live.co.uk
AND I WILL TRY TO GET THEM AND ATTACH FOR YOU

I AM HOWEVER, WORKING ON THEM ONE BY ONE, TO FIND AND REPLACE MISSING FILES
THANKS FOR UNDERSTANDING

CLARE x

Private Show

2011-06-11T09:06:00.010+01:00

This tutorial was written by me on 11th June 2011
It assumes you have working knowledge of PSP and Animation Shop and it's tools,
was written in Version 9, feel free to merge layers as when needed, unless otherwise stated
You will need:

Tube Of Choice, i am using the work of Keith Garvey and you will need a licence to use his work from PTE
Template 'Private Show' by Cindy & Kat, which you can download from here
Scrap Kit 'Digi Mania' which you can download from here
Eye candy 4000 - gradient glow
xenofex - constellation
my supplies here

On to the tutorial

Open the template / duplicate / close the original / delete the copyright layer
highlight right pink rectangle / selections / select all / float / defloat / open a paper of choice from kit and paste as a new layer / invert and hit delete
repeat with left rectangle using same paper / delete original layers
highlight thin blue line layer / adjust / colorize / hue and saturation / with 0 and 0
repeat with copy of raster 2 and raster 2 and promoted selection
highlight back filmstrip layer / selections /select all / float / defloat / delete
open a paper of choice and paste as a new layer / invert and hit delete
highlight blue circle layer / float / defloat / add a new raster layer and flood fill with a colour from your tube / delete the original layer
click on the filmstrip layer and using your selection tool draw around both sets of stars / add a new layer and flood fill selections white
drag below the filmstrip layer and add noise of choice
highlight polaroid layer and use your selection tool set to point to point to draw around the black / hit delete / add a new layer and floodfill grey / paste tube as a new layer / invert and hit delete

on the grey layer you just added / effects / texture / blinds of choice / drop shadow tube
change blend mode of the tube to overlay
click on the word art / eye candy 4000 - glow / white / width 3
highlight the filmstrip layer / selection tool - rectangle / draw around the first box / open tube and paste as a new layer / position / invert and hit delete
repeat the above step with the other 2 frames
drag the tubes below the filmstrip layer and change the blend mode to hard light
open glittersplat from the kit and paste as a new layer / drag below all layers but place on top of the large grey circle

delete raster 4 and copy of raster 4
open main tube and paste as a new layer ( i mirrored mine ) position where u like / drop shadow
delete raster 5
move the word art towards the bottom of the tag to cover the cut off ( see mine )
hide the thin blue line and background layer / merge visible
add copyrights and your licence
duplicate the thin line twice and rename 1, 2 and 3
click on 1 / effects xenofex constellation / setting bling bling / star size 2.0 / apply
repeat with the other 2 layers but change random seed

flood fill the background layer with white
add anymore elements you want from the scrap kit
write your name on the polaroid
hide 2 and 3 and copy merged into animation shop
hide 1 and 3 and copy merged after current frame
hide 1 and 2 and copy after current frame
view animation t check it
repeat the above steps until you have 15 frames
open the spark suppied.. click of frame1 and do the same with your tag / drag the aprk onto the tag / view animation and save as a .gif

if you have any questions, or want me to show your tag on my blog, please email me at clare_33@live.co.uk

Fantasy Is Reality ~ Challenge

2011-05-16T07:36:00.003+01:00

This week our Artist Theme Tube Challenge theme will be... "Fantasy Is Reality"
For this special challenge, you will be creating a "fantasy" tag using any fantasy style
tube in any one of our Image Galleries on our main site http://britsynin.com

*Please only use a fantasy tube from one of our BritsyNin artists.

*Please include the slogan "Fantasy Is Reality" somewhere in your tag.

*You MAY use scrap kits to create your tag.

*If following a designer tutorial, please try to make it your own.
This challenge is about CREATING your own fantasy tag.

*All finished tags must be posted in this thread no later than Sunday 21st May

*All who participate will receive a special exclusive set of heart frames! Let's Play!!!!

click below to play

Template 115

2011-05-15T12:39:00.002+01:00

You can download this here

Megan ~ Kenzie Kids

2011-05-15T12:37:00.001+01:00

You can download her here

Forum Tag Set #1

2011-05-15T10:46:00.004+01:00

This tutorial was written by me on 15th May 2011 It assumes you have working knowledge of PSP and Animation Shop and it's tools, was written in Version 9, feel free to merge layers as when needed, unless otherwise stated
You will need:
Tube of choice, I am using a tube from paulas collection from BritsyNin
My Supplies here

Open a new transparent canvas 600 x 250
using your colourpick tool, choose 2 colours from your tube and set the gradient to foreground/background - angle 41 / flood fill
open your tube and paste as a new layer / resize 75% 3 times
duplicate your tube 5 times and rotate and move them round / merge these 5 tubes visible ( hide the bg layer ) so it covers the background layer

change the blend mode to screen and lower the opacity to around 60
selections / select all / modify / contract 10
add a new layer and flood fill white /modify / contract 3 / hit delete
add noise / gaussian / 45 monochrome unchecked
open the bow supplied and paste as a new layer and drag down abit / change the blend mode to luminance legacy and lower opacity to around 66
open up the other tube and paste as a new layer / resize 75% twice and position
duplicate the tube and on the bottom one / gaussian blur - 3
on the top copy change the blend mode to hard light
select your preset shape tool with both colours set to white and draw a rectangle vertically along the left side / change blend mode to overlay
write any text you want in the rectangle on the left
add copyrights / merge visible and save

Avatar:

open a new transparent image 150 x 150
repeat step 2 above
then repeat steps 6 7 and 8
use your selection tool set to rectangle and draw around the white noise / open tube and paste as a new layer and position where you like / invert and hit delete
change the blend mode to soft light
using the same font as you did before, type a large letter
add the same noise and a drop shadow
add copy rights and save

Evil Nurse

2011-05-15T09:16:00.007+01:00

This tutorial was written by me on 15th May 2011 It assumes you have working knowledge of PSP and Animation Shop and it's tools, was written in Version 9, feel free to merge layers as when needed, unless otherwise stated
You will need:
Tube of choice, I am using the work of Paula, at BritsyNin.. you can find the tube here
Scrap Kit 'NurseTG' which you can download from Randysin

Open a new transparent image 600 x 600 and flood fill white
open frame3 and paste as a new layer / resize 50%
select inside the frame using your magic wand / selections - modify - expand 2
open a paper of choice and paste as a new layer / invert and hit delete / drag the paper below the frame
again click inside the frame / expand 2 and open your tube and paste as a new layer / invert and hit delete / change the blend mode to overlay
merge visible these layers and resize 70%
open badge1 and paste as a new layer / resize 50%
open the chart and paste as a new layer / resize 60%
drag the chart to the bottom and position the badge over it, use your eraser tool to erase some of the string so it looks like it's hanging off of the chart
use your selection tool set to rectangle and draw around the photo id box on the badge
open your tube and paste as a new layer and position inside this box, you will need to resize, when happy / invert and hit delete and drag the tube under the badge
repeat the above steps but this time flood fill the box white
move the circle frame to the top left of the tag and drag below the chart and badge / duplicate / mirror and position bottom right
open blood splat2 and resize 75% twice and drag to the bottom
open your main tube and paste as a new layer and position
open staple2 paste as a new layer / resize 20% then resize 50% and position
open wa12 / resize 70% and position to the bottom of your tag
add your copyrights and any text you would like / resize if needed and save

Call Me Crazy

2011-05-11T07:31:00.007+01:00

This tutorial was written by me on 11th May 2011 It assumes you have working knowledge of PSP and Animation Shop and it's tools, was written in Version 9, feel free to merge layers as when needed, unless otherwise stated

You Will Need:
Template 191 by Beth which you can get here
tube of choice I am using the work of Keith Garvey and you will need a licence to use his work from My Psp Tubes
Scrap Kit 'Black & White' from here

1. open the template / duplicate and close the original
2. delete the copyright
3. highlight gradient rect / float / defloat
4. open a paper of choice and paste as a new layer / invert and delete
5. delete the original layer

6. highlight wordart layer / adjust / hue and sat / change to 0 0
7. highlight blue half circles / float / defloat
8. open paper of choice and paste as a new layer / invert and delete / delete original layer
9. add a noise to the white circle layer
10. highlight pink frame layer and adjust hue / saturation to 0 0

11. open tube of choice and paste as a new layer
12. you may need to move the wordart and rectangle a bit
13. click inside the large black rectangle with your magic wand / expand / 2
14. open tube of choice and paste as a new layer and position / invert and delete / change blend mode to screen

15. add a drop shadow to the original main tube
16. open tag2 and resize by 25% and paste as a new layer and position / drop shadow
17. open ribbonflower1 and paste as a new layer / resize 30% and position / drop shadow
18. add the copyrights and any text you would like / merge visible and save as a .png

If you have any questions please don't hesitate to contact me

Bees1

2011-05-09T07:23:00.001+01:00

You can download these here

Bees

2011-05-09T07:22:00.002+01:00

You can download these here

Flowers

2011-05-09T06:47:00.002+01:00

You can download these here

Template 114

2011-05-09T06:20:00.001+01:00

You can download this template here

Template 113

2011-05-09T06:03:00.002+01:00

You can download this template here

Pink Alert

2011-04-30T11:33:00.003+01:00

This tutorial was written by me on 30th April 2011 It assumes you have working knowledge of PSP and Animation Shop and it's tools, was written in Version 9, feel free to merge layers as when needed, unless otherwise stated

You will need:

'Tickled Pink' FTU Scrap kit from here

Tube of choice, I am using the work of Elias Chatzoudis, you will need a licence to use his work from My Psp Tubes

1.Open a new transparent image 600 x 600 and flood fill white
2.Open frame PD 01 paste as a new layer / resize / 75% all layers unchecked
3.use your magic wand and click inside the circle / selections / modify / 6
4.open paper 12 / paste as a new layer / selections / invert and hit delete and drag below the frame layer

5.use your magic wand and again click inside the circle / expand 6
6.open your tube of choice and paste as a new layer / invert and hit delete / change blend mode to hard light and lower the opacity to around 60
7.hide the background layer and merge visible

8.open frame pd 02 / paste as a new layer / resize 80% all layers unchecked
9.use your magic wand and click inside both sides of the frame / open a paper of choice and paste as a new layer / invert and hit delete / drag below the frame
10.use the magic wand and click again inside the left side of the frame only / copy and paste your tube / invert and hit delete
11.repeat with the other side / hide all layers / except for the frame and tubes you just made and merge visible

12.drag the circle frame to the top / image / resize / 50% / twice
13.position it at the top left hand corner of the frame
14.open trim and paste as a new layer / rotate 90 / resize / 50% and position under the circle
15.open ribbon3 / resize / 40% and paste as a new layer on the trim / use freehand selection or eraser to erase the over hang at the bottom

16.open print01 and paste as a new layer and drag to the bottom
17.select your selection tool / set to rectangle and draw out a rectangle along the bottom
18.open your tube and paste as a new layer and position
19.fill your selection with a colour that matches your tag
20.modify / contract / 5
21.add a new layer and flood fill white / contract / 5 / add a new layer and flood fill with the previous colour

22.on the white layer / add some noise
23.add drop shadows to your layers
24.delete the white layer / add your name / merge visible and save as a .png

Lily Blog Layout

2011-01-13T09:29:00.002Z

You can download this here

Easy Name

2011-01-13T06:38:00.003Z

This tutorial was written by me on 13th January 2011 It assumes you have working knowledge of PSP and Animation Shop and it's tools, was written in Version 9, feel free to merge layers as when needed, unless otherwise stated

You will need:

my supplies here

fat font ( I used Broadway )

Open a new transparent image 600 x 400 and flood fill white

open the gold pattern and minimise in psp, select it as your fill and stroke as black

select the font you want to use and type your text ( create as vector ) stretch the name to the size you want

when happy convert to raster

selections > select all > float > defloat > modify > expand > 3

add a new layer and drag below the text and flood fill black

use your magic wand and select each of the black letters you just made, then highlight the gold lettering > duplicate twice so you have 3 frames

rename them 1 2 and 3

highlight 1 layer > adjust add noise, settings: random, 40, monochrome > ok

apply the same noise to layers 2 and 3 but change the amount to 47 and 55

add a drop shadow of choice to each of the 3 layers

you can now add any elements you wish to your name

open animation shop and hide layers 2 and 3 in psp > copy merged and paste as a new animation

hide layers 1 and 3 and copy merged and paste into animation shop after current frame

hide layers 1 and 2 and copy merged and paste after current frame in animation shop

view animation and save as a .gif

If you have any questions or comments regarding this tutorial or would like me to display
your creation on my blog, please leave me a comment below or write a message
in my Chat Box, alternatively you can email me at clare_33@live.co.uk

Rainey Reindeer ~ Kenzie Kids

2010-12-20T07:54:00.002Z

You can download Rainey here

Clara Claus ~ Kkenzie Kids

2010-12-20T07:53:00.002Z

Another member of the Kenzie Kids

you can download her here

Template 112

2010-12-15T08:47:00.002Z

You can download this here

Template 111

2010-12-15T08:46:00.002Z

You can download this here

Template 110

2010-12-15T08:16:00.001Z

You can download this template here

Christmas Cheer

2010-12-14T11:08:00.005Z

This tutorial was written by me on 14th December 2010 It assumes you have working knowledge of PSP and Animation Shop and it's tools, was written in Version 9, feel free to merge layers as when needed, unless otherwise stated

You will need:

Scrap kit 'Christmas Cheer' which you can download here

tube of choie I am using the work of Sheila Craig which you can download from here

mask of choice

Open a new transparent image 600 x 600 and flood fill white

open frame1 > image > resize > 55% and paste as a new layer > resize 70%

activate the magic wand and click inside all 3 frames > make sure to click inside the little white parts also > modify > expand 3

open paper8 and paste as a new layer > selections > invert and hit delete > drag the paper below the frame layer

again activate the magic wand and click inside all parts og the first frame > open close up tube and paste as a new layer > invert and hit delete > select none > drag below the frame layer and change blend mode to luminance legacy and lower the opacity

repeat the above steps with the other 2 frames usinf the same tube

merge visible the tube layers and add a drop shadow of choice to the frame

open sleigh element and resize 55% > copy and paste as a new layer > resize > 75% and position to the left of the image

open element bow6 and resize 55% > copy and paste as a new layer > add a drop shadow and drag to the bottom below the frame

click on the bottom layer and add a new layer > select all > open a paper of choice and paste into selection > apply mask of choice > merge group

open the main tube and paste as a new layer > drop shadow of choice

add the copyrights and your mark and any text you like > delete the white background if u wish > merge visible layers > save as a .png
If you have any questions or comments regarding this tutorial or would like me to display
your creation on my blog, please leave me a comment below or write a message
in my Chat Box, alternatively you can email me at clare_33@live.co.uk

Nature in Winter

2010-12-02T07:28:00.007Z

This tutorial was written by me on 2nd December 2010 It assumes you have working knowledge of PSP and Animation Shop and it's tools, was written in Version 9, feel free to merge layers as when needed, unless otherwise stated

You will need:

Template20 by Babes which you can download from here
Scrap Kit 'Northern Lights' by Vabs whcih you can download here
Eye Candy 5 Impact- Gradient Glow
xenofex - constellation

On to the tut....

Open the template and duplicate and close the original > delete the copyright layer

Image > canvas size 600 x 600

highlight layer 1 > selections > float > defloat > open paper9 and paste as a new layer > selections > invert and hit delete > delete the original layer

highlight layer 3 > float > defloat > open paper8 and paste as a new layer > invert and hit delete > delete the original layer

open element25 and paste as a new layer > resize 65% and position to the left of the rectangle

open element37 and paste as a new layer > resize 65% and position over the rectangle to the right

open element46 and paste as a new layer and drag to the bottom > resize 75% > duplicate > image mirror and merge these 2 layers visible

open element53 and paste as a new layer over the rectangle > use your eraser tool to delete any overhang from around the outside of the rectangle

duplicate the curtain layer twice and rename 1, 2 and 3

on layer one > adjust > noise, settings: gaussian,monochrome - 30

on layer two > same settings > but 40

on layer three > same settings > but 50

drop shadow any layers you wish at this point > add a small gradient glow to the word art ( or drop shadow )

activate the glitter layer at the bottom and duplicate twice and rename them a, b and c

highlight a > xenofex constellation, settings:bling bling - star size-5, size variation-25, edge star-19, overall-0, overdrive-100, twinkle amount-75, keep original image > ok

highlight b and repeat constellation but change random seed

highlight c and repeat constellation but change random seed

add any text you like, copyrights and your mark > resize if needed

Hide layers 2,3,b,c and copy merged and paste into animation shop as a new animation

unhide layers and hide 1,3,a,c and copy merged and paste after current frame

unhide layers and hide 1,2,a,b and copy merged and paste after current frame

view animation and save as a .gif

If you have any questions or comments regarding this tutorial or would like me to display
your creation on my blog, please leave me a comment below or write a message
in my Chat Box, alternatively you can email me at clare_33@live.co.uk

Winter Blues

2010-11-29T04:02:00.009Z

This tutorial was written by me on 29th November 2010 It assumes you have working knowledge of PSP and Animation Shop and it's tools, was written in Version 9, feel free to merge layers as when needed, unless otherwise stated

You will need:

Scrap Kit 'Winter Blues' which you can download here
Tube of choice, I am using the work of Elias Chatzoudis and you will need alicence to use his work from My Psp Tubes
Vanderlee ~ Snowflakes
Visman Sparkle

On to the tut

Open a new transparent image 600 x 600 and flood fill white > open element56 from the kit and paste as a new layer > image resize > 65% > all layers un checked

using your magic wand tool click inside the frame > modify expand > 5 > open paper3 and paste as a new layer > invert and hit delete > select none > drag the paper below the frame

resize the frame and paper > 80% > duplicate both > mirror both

use your deform tool to rotate both slightly at angles

use your magic wand tool and click inside both of the frames > modify > expand > 3

open element45 and paste as a new layer > invert and hit delete > lower opacity to around 75

open element52 > resize 25% > position in the frames > duplicate > use your deform tool to straighten them > when happy merge the trees visible and add a drop shadow of choice

using your freehand selection tool draw around each of the frames insides > effects > plug ins > vanderlee > snowflakes, settings:amount 20 > all other keep at default

hide the background layer > merge visible > drop shadow

open your tube of choice and paste as a new layer > position > drop shadow

activate the bottom layer > open paper13 and paste as a new layer > apply mask of choice > merge group

open element45 and paste as a new layer above the mask > using your eraser tool erase any that overhanging the bottom of the tag > duplicate > image > mirror

open element34 > resize 55% and paste as a new layer on the right hand side of the tag below your tube ( see mine ) duplicate > resize 80% and position other side > drop shadow both and merge together

open element13 > resize > 35% and paste at the bottom of the left frame to cover the rose stems > drop shadow

open element46 and paste as a new layer over the tag and place below the tube layer

activate te layer with the frames > duplicate twice and rename 1, 2 and 3

on layer one > visman > sparkle > settings of choice

layer 2 > same but change random seed

layer 3 > same but change random seed

add copyrights > your mark and any text you would like > resize if you wish

hide layers 2 and 3 and copy merged and paste into animation shop

hide layers 1 and 3 and copy merged and paste after current frame

hide ayers 1 and 2 and copy merged and paste after current frame

view animation and save as a .gif

If you have any questions or comments regarding this tutorial or would like me to display
your creation on my blog, please leave me a comment below or write a message
in my Chat Box, alternatively you can email me at clare_33@live.co.uk

I'm Stuffed

2010-11-24T09:07:00.008Z

This tutorial was written by me on 24th November 2010 It assumes you have working knowledge of PSP and Animation Shop and it's tools, was written in Version 9, feel free to merge layers as when needed, unless otherwise stated

You will need:

Template 'Im stuffed' which you can download here

Tube of choice, I am using the work of Elias Chatzoudis, you need a licence to use his work from here
My supplies here

On to the tutorial...

Open the template and duplicate and close the original > delete the copyright layer

activate circle background layer > float > defloat > open paper1 and paste as a new layer > invert and hit delete > select none and delete the original layer

activate group-copy of circle > effects > artistic > sepia toning, settings: 75 > ok

adjust > brightness/contrast > -40 brighness / contrast 0 > ok

duplicate > merge down > twice

activate inner backrectangle > selections > float > defloat > open paper2 and paste as a new layer > invert and hit delete > select none > delete original layer

activate backrectangle > float > defloat > open paper3 and paste as a new layer > invert and delete > delete the original layer

repeat the above steps with the dotted line fill using the same paper

activate the doodles layer and apply the same sepia tonig and same brightness adjustment

delete both the word arts on the tag ( black and white )

activate the large circle again > float > defloat > open tube and paste as a new layer > invert and delete > select none

apply the same sepia toning to the tube then lower the opacity to around 65

add a drop shadow of choice to the wordart in the large circle

activate the tag layer > float > defloat > open paper4 and paste as a new layer > invert and hit delete > delete the original layer > merge down the tag and the shadow

merge visible all the parts of the tag including eyelet > drop shadow

activate outer happy thanksgiving and apply the sepia toning twice then apply the same brightness/contrast as before

open main tube and paste as a new layer > position > drop shadow

Autumn Leaves

2010-11-24T08:52:00.001Z

You can download these here

Autumn Wordart

2010-11-24T08:50:00.003Z

You can download this here

Template 108

2010-11-24T08:48:00.002Z

You can download this here

Template 107

2010-11-24T08:46:00.002Z

You can download this here

Template 106

2010-11-24T08:43:00.001Z

You can download this here

Autumn Frame Set

2010-11-24T08:22:00.002Z

Here is a small collection of autumn/fall coloured frames
you can download these from here

Party Animal

2010-11-23T11:06:00.009Z

This tutorial was written by me on November 23rd 2010 It assumes you have workingknowledge of PSP
and Animation Shop and it's tools, was written in Version 9, feel free to merge layers as when needed, unless otherwise stated

You will need:
template190 by beth which you can download from Blissfully Beth
Tube of choice, I am using the work of Elias Chatzoudis and you will need a licence to use his work from My Psp Tubes
Scrap Kit 'Sticky n Sweet' by Tamie which you can download from here
Eye Candy 5 impact ~ Gradient Glow
Eye Candy 4000 ~ HSB Noise

On to the tutorial......

Open the template > duplicate and close the original > delete the copyright layer and the background layer > add a new raster layer and send to the bottom and flood fill with white

activate the blue oval layer > selections > float > defloat > open paper3 and paste as a new layer > invert and hit delete > select none > delete the original layer

activate the black oval layer and add a small black glow using gradient glow

activate sml blue frame bg > selections > select all > float > defloat > open paper8 and paste as a new layer > invert and hit delete > delete the original layer

add same gradient glow to the black small frame

repeat the above steps with the white rectangle

choose 2 colours from your tube and set the colour to gradient, settings: linear-angle35-repeat1

activate the stripes layer > float > defloat > add a new layer and flood fill with your gradient > delete the original layer

add the same gradient glow to the stripes

click inside the large frame with your magic wand > modify > expand 2 > open tube of choice and paste as a new layer > invert and hit delete > change blend mode to soft light

repeat the above steps with the smaller frame

add the gradient glow to the stars

open your tube and paste as a new layer > position > add a drop shadow of choice

add the gradient glow to the 'party animal'

open glitter3 and paste as a new layer and drag to the bottom and move to the top left of the tag > duplicate > image > mirror > image flip > merge down > drop shadow

add copyrights > text and your mark onto the layer with the tube and hide

add gradient glow to the skull

activate the large rectangle bg layer > duplicate twice > rename 1, 2 and 3

activate the top layer and go to eye candy 4000 - hsb noise, settings: default but change to zebra stripes

repat with layers 2 and 3 but change the random seed

open the diamond from the kit and paste as a new on top > resize > 50% and position ( see mine )

duplicate > resize 50% and position ( see mine ) duplicate it again and position > drop shadow on all > merge visible the diamonds

duplicate > image > mirror

hide layers 2 and 3 and copy merged > paste into animation shop as new image

hide layers 1 and 3 and copy merged and paste after current frame

hide layers 1 and 2 and copy merged and paste after current frame

view animation and save as a .gif

If you have any questions or comments regarding this tutorial or would like me to display
your creation on my blog, please leave me a comment below or write a message
in my Chat Box, alternatively you can email me at clare_33@live.co.uk

Winterlicious

2010-11-22T05:02:00.007Z

This tutorial was written by me on 22nd November 2010 It assumes you have working knowledge of PSP and Animation Shop and it's tools, was written in Version 9, feel free to merge layers as when needed, unless otherwise stated
You will need:

Template xmas13 by tamie which you can download here

(Left hand side under xmas templates)

Scrap Kit 'Wintertyme' by tracy which you can download here

Tube of choice, I am using the work of Elias Chatzoudis, you will need a licence to use his work from My Psp Tubes

On to the tut....

Open the template > duplicate > close the original

image > resize > all layers 80% > image canvas size 600 x 600 and flood fill background white if needed

highlight the oval layer > selections > select all > float > defloat > open paper20 and paste as a new layer > invert and hit delete > delete original layer

delete copyright layer

highlight large circle layer > selections > select all > float > defloat > open paper23 and paste as a new layer > invert and hit delete > delete the original layer > adjust > brightness/contrast and slide brightness to around 40

highlight the smaller circle layer > selections > select all > float > defloat > open paper21 and paste as a new layer > invert and hit delete > delete the original layer > add the same brightness/contrast

highlight rectangle layer > selections > select all > float > defloat > open paper12 and paste as a new layer > invert and hit delete > delete original layer

highlight glitter oval > adjust > hue /saturation > colorize and change to match the rest of your tag

repeat the above step with the big snowflake

highlight the rectangle at the back > float > defloat > open tube of choice and paste as a new layer > invert and hit delete > change blend mode to luminance legacy and lower opacity to around 60

repeat the above step using a different tube on the small circle layer

open up the main tube and paste as a new layer and position > move the snowflake if it is being covered

open up skates > resize 20% and paste as a new layer and position ( see mine ) > adjust > sharpen

open up icicles and paste as a new layer > resize 80% and using your deform tool rotate so that it fits inside the rectangle ( see mine ) use your eraser tool to delete any over hang and drag below the tube layer

open bowrap1 and resize 50% > paste as a new layer ( see mine )

add any drop shadows to layers you wish now

add copyrights and your mark and any text you like > merge visible > delete the wite background layer and save as a .png

If you have any questions or comments regarding this tutorial or would like me to display
your creation on my blog, please leave me a comment below or write a message
in my Chat Box, alternatively you can email me at clare_33@live.co.uk

Autumn Butterflies

2010-11-21T12:43:00.004Z

This tutorial was written by me on 20th November 2010 It assumes you have working knowledge of PSP
and Animation Shop and it's tools, was written in Version 9, feel free to merge layers as when needed, unless otherwise stated

You will need:
Scrap Kit 'Autumn Romance' which you can download from here
Tube of choice, I am using the work of keith garvey, you will need a licence to use his work from My Psp Tubes
mask of choice

open a new transparent image 600 x 600 and flood fill white
open element13 and paste as a new layer > image resize > 55% then resize 75%
using your magic wand tool click inside the frame > modify > expand > 4
open paper1 and paste as a new layer > invert and hit delete > drag below the frame layer

click inside the frame again with the magic wand > modify > expand 4
open tube of choice and paste as a new layer> invert and delete
change blend mode to luminance legacy and lower opacity to around 25
hide background layer and merge visible > add a drop shadow of choice
move the frame to the top left of the canvas > duplicate > resize 75% > use your deform tool to rotate it > adjust > sharpen

open element15 > effects > artistic > sepia toning > ok
paste as a new layer on the top left corner of the larger frame > image > resize 40% > add same drop shadow

highlight the background layer > add new raster layer > selections > select all > open paper1 and paste into selection > add mask of choice > merge group
open your main tube and paste as a new layer and position > add a drop shadow of choice
open element16 and paste as a new layer > image > resize 60% and position at the bottom
( see mine )

open element6 and paste as a new layer > resize > 15% and position where you like > drop shadow
duplicate > image mirror > resize 80%
open element9 > resize 25% and paste as a new layer > drag below the frames > duplicate and move down
add the copyrights, your mark and any text you like > crop around the tag > resize if needed > delete the white background layer and save as a .png

If you have any questions or comments regarding this tutorial or would like me to display
your creation on my blog, please leave me a comment below or write a message
in my Chat Box, alternatively you can email me at clare_33@live.co.uk

Thinking Pink

2010-10-31T11:31:00.008Z

This tutorial was written by me on 31st October 2010 It assumes you have working knowledge of PSP and Animation Shop and it's tools, was written in Version 9, feel free to merge layers as when needed, unless otherwise stated
You will need:
Scrap Kit 'Think Pink' by Tamie with you can download from Addictive Pleasures
Tube of choice, I am using the work of Elias Chatzoudis, you will need a licence to use his work from My Psp Tubes

Open a new transparent image 600 x 600 and flood fill white

open element31 and paste as a new layer > resize 60%

click inside the frame using your magic wand > modify > expand 3

open p1 and paste as a new layer > invert and hit delete > drag below the frame

click inside the frame again using your magic wand, open tube of choice ( preferrably a close up ) and paste as a new layer > invert and hit delete > change blend mode to luminance legacy and lower the opacity to around 65

add your other tube of choice and paste as a new layer > add drop shadow of choice

open element 54 and paste as a new layer > resize 55% position to the right hand side of frame > using eraser erase any over hangs > duplicate > image > mirror

open element59 and paste as a new layer > resize > 80% twice and paste over the paper background.. use your eraser tool to erase any over the frame

add a drop shadow of choice on the frame

open element15 and resize > 60% and paste as a new layer and position ( see mine ) add drop shadow of choice

delete the background layer > add copyrights and your mark and any tetx you like > merge visible and save as a .png

If you have any questions or comments regarding this tutorial or would like me to display
your creation on my blog, please leave me a comment below or write a message
in my Chat Box, alternatively you can email me at clare_33@live.co.uk

Pumpkin

2010-10-31T10:26:00.008Z

This tutorial was written by me on 31st October 2010 It assumes you have working knowledge of PSP and Animation Shop and it's tools, was written in Version 9, feel free to merge layers as when needed, unless otherwise stated
You will need:

Tube of choice, I am using the work of Elias Chatzoudis and u will need a licence to use his work from My Psp Tubes
Scrap Kit 'Funky Halloween' which you can download from Kittz Kreationz
Eye Candy 5 - Impact - gradient glow

Open a new transparent image 600 x 250

select all > open FH_P3 and paste as a new layer > invert and hit delete > select none

fill the bottom layer black and on the paper layer change blend mode to luminance legacy and lower opacity to around 65

select your preset shape tool background to white and foreground null > size 4 and draw a rectangle within your image ( see mine ) > convert to raster

select your magic wand tool and click inside the white rectangle > modify > expand 1

open your tubes of choice and position inside the rectangle > when happy merge tubes together > selections > invert and hit delete> change blend mode to lumincance legacy

dulpicate the tube layer and using your free hand selection tool, draw around the pumpkin > selections > invert and hit delete > select none and change blend mode to normal

click on the white rectangle layer and add a small black gradient glow

add the copyrights and your mark add any textadd any elements from the scrap kit you like > merge visible and save as a .png

Spells

2010-10-31T07:45:00.008Z

This tutorial was written by me on 31st October 2010 It assumes you have working knowledge of PSP and Animation Shop and it's tools, was written in Version 9, feel free to merge layers as when needed, unless otherwise stated

You will need:
My supplies here
A tube of choice, I am using the work of Elias Chatzoudis and you will need alicence to use his work from My Psp Tubes
Eye Candy 5 - Impact - Gradient Glow

Open a new transparent image 600 x 600 and flood fill white

open the frame supplied and paste as a new layer in the centre

using your magic wand click inside the frame > modify > expand > 4

open the image supplied and paste as a new layer > invert and hit delete > drag below the frame layer

open your tube and paste as a new layer > drop shadow of choice and position

open the spider web and paste as a new layer over the centre of your image open up the leaves and paste as a new layer over the frame

add a small black gradient glow to the frame using eye candy impact gradient glow

highlight the web layer and duplicate twice > rename them 1,2 and 3

add the copyrights, your mark and any text you would like

click on 1 > adjust add noise: random, monochrome 50% > ok

click on 2 > same settings but change to 65%

click on 3 > same settings but change 80%

click on 1 again and apply same gradient glow as before > repeat with 2 and 3

hide layer 2 and 3 and copy merged and paste into animation shop

hide layer 1 and 3 and copy merged and paste after current frame

hide layer 1 and 2 and copy merged and paste after current frame

view animation and save as a .gif

If you have any questions or comments regarding this tutorial or would like me to display
your creation on my blog, please leave me a comment below or write a message
in my Chat Box, alternatively you can email me at clare_33@live.co.uk

Forget the ghosts

2010-10-16T14:05:00.007+01:00

This tutorial was written by me on October 16th 2010 It assumes you have working knowledge of PSP and Animation Shop and it's tools, was written in Version 9, feel free to merge layers as when needed, unless otherwise stated
you will need;

Tube of choice, I am using the work of Elias Chatzoudis, you will need a licence to use his work from My psp tubes
template 273 by Missy which you can download from here
My supplies here
eye candy impact - gradient glow

Open the template > duplicate > close the original > delete the copyright layer > image > canvas size > 650 x 650

delete the rectangles layer and highlight the oval layer > float > defloat > open paper1 and paste as a new layer > invert and hit delete > delete the original layer

add a small gradient glow

highlight frame layer and add noise set to 100%

highlight frame background layer > float > defloat > flood fill using a gradient from 2 colours from your tube

while still selected copy and paste a few of your tubes when happy with placement > invert and hit delete > merge the tube layers together and change blend mode to luminance legacy and lower opacity

highlight wordart layer > adjust > colorize and change to grey and repeat with the beware layer > add the glow to both

open main tube and paste as a new layer and position > drop shadow

open the tag and paste as a new layer > use your deform tool to rotate a little bit > drop shadow > add name

copy and paste your tag into animation shop open the bling supplied and add to the background > view animation and save as a .gif

If you have any questions or comments regarding this tutorial or would like me to display
your creation on my blog, please leave me a comment below or write a message
in my Chat Box, alternatively you can email me at clare_33@live.co.uk

Spooky

2010-10-16T09:07:00.011+01:00

This tutorial was written by me on 16th October 2010 It assumes you have working knowledge of PSP and Animation Shop and it's tools, was written in Version 9, feel free to merge layers as when needed, unless otherwise stated

You will need:

Template101 by Toxic Desirez

tube of choice, I am using the work of Elias Chatzoudis, you will need a licence to use his work which you can get from My Psp Tubes

Eye Candy impact - gradient glow

You can get my supplies

here

Open the template and duplicate > close the original, delete copyright layer > image canvas size 650 x 650

using your colour pick tool select 2 colours from your tube and set the gradient to background-foreground

highlight the rectangle layer > float > defloat > add a new layer and flood fill with gradient > delete the original layer

highlight the circle layer > float > defloat > add a new layer and flood fill with colour of choice > delete original layer

highlight the bats layer > adjust > brightness and contrast and move sliders until the bats go black

repeat with the wordart, dotted rectangle also

highlight the rectangle layer again > float > defloat

open tube of choice and paste as a new layer and position > invert and hit delete > duplicate > image > mirror and lower opacity to around 30 and merge the 2 tubes together

using your selection tool draw around the dotted rectangle > invert > while on the tube layer hit delete

add a small black glow to the circle and to the word art

open up the main tube and paste as a new layer and position > add drop shadow of choice

open the spider supplied and paste as a new layer and position > drop shadow

add a new layer above the background and flood fill with a colour of choice

apply the mask > merge group

add the copyrights and your mark and any text you like

merge visible your copyrights, text, and tube and then hide

merge visible all other layers

you should now only have 2 layers

hide the top layer and copy the bottom and paste into animation shop

duplicate until you have 13 frames matching the animated spider

add the animated spider to your tag

go back to psp and copy the other layer and paste into animation shop > duplicate 13 frames and add to the tag

resize if needed > find the centre frame where the spider is at the bottom and change the frame properties to around 120

view animation and save as a .gif

In The Blue

2010-09-26T09:44:00.007+01:00

This tutorial was written by me on 26th September 2010 It assumes you have working knowledge of PSP and Animation Shop and it's tools, was written in Version 9, feel free to merge layers as when needed, unless otherwise stated

You Will Need:

Scrap Kit 'In the blue' by Lis which you can purchase from Psp Girl Place

Mask Of choice

Open a new transparent image 600x600 and flood fill white

Open element53 > image > resize > 75% all layers and paste as a new layer

select the magicwand tool and click inside both of the circles > modify > expand 4

open a paper of choice from the kit and paste as a new layer under the frame > selections > invert and hit delete > select none

click inside the left circle > modify > expand 2 > open tube of choice and paste as a new layer > position > invert and hit delete > change the blend mode to luminance

repeat with the other circle but mirror your tube

lower opacity on both tubes to around 60

open element 54 and paste as a new layer and place in the centre

open main tube and paste as a new layer and position > add a drop shadow of choice

open element13 and paste as a new layer on the right > using your eraser tool > erase some string to make it look like it going through the frame > drop shadow

crop around the tag resize if needed > add font > copyrights > delete bg layer > merge visible and save as a .png

Gothical

2010-09-24T10:16:00.011+01:00

This tutorial was written by me on 24th September 2010 It assumes you have working knowledge of PSP and Animation Shop and it's tools, was written in Version 9, feel free to merge layers as when needed, unless otherwise stated

You will need

Tube of choice, I am using the work of Elias Chatzoudis, you will need a licence to use his work from My Psp Tubes

My Supplies here

pentacom - dot and cross

eye candy 5 impact - gradient glow

Open up the template and duplicate and close the original

Delete copyright layer > add a new layer > send to bottom and flood fill white

Image > canvas size > 700 x 700

Using your color pick tool choose 2 colours from your tube then set your colour to gradient with these settings: 36,1,linear

highlight grey oval layer > float > defloat and flood fill > add a new layer >with your gradient > select none > delete original layer

highligh the blk half circle layer and apply pentacom dot and cross with default settings

highlight horiz blk line and apply the gradient glow ( glow of choice )

repeat glow with the 2 vertical lines

highlight the grey rect layer > float > defloat > add new layer and flood fill with your gradient ( click the invert button on the gradient ) delete the original layer > select none

add the gradient glow

add the gradient glow to the large oval also

with oval layer highlighted > float > defloat > open tube and paste as a new layer > invert and hit delete > change blend mode to screen and lower opacity to around 66

open up wordart1 and paste as a new layer and position over the tube you just added

open up wordart2 and paste as a new layer and position over the rectangle and add the gradient glow, same settings as before

open up your tube and paste as a new layer and position behind the rectangle > use your eraser tool to erase any of her hanging below > add drop shadow of choice

open the bat and paste as a new layer ( see mine ) add drop shadow of choice

add your name, copyright and your mark > merge visible > resize if you wish and paste into animation shop

open up the spider and add this to your tag > change the frame properties to 20 > view animation and save

If you have any questions or comments regarding this tutorial or would like me to display
your creation on my blog, please leave me a comment below or write a message
in my Chat Box, alternatively you can email me at clare_33@live.co.uk

Template 104

2010-09-20T08:59:00.001+01:00

You can download this here

Template 103

2010-09-20T08:58:00.002+01:00

You can download this here

Template 102

2010-09-20T08:56:00.000+01:00

You can download this here

Template 101

2010-09-20T08:55:00.001+01:00

You can download this here

Overylay ~ Tutorial

2010-09-13T08:04:00.007+01:00

This tutorial was written by me on 13th September 2010 It assumes you have working knowledge of PSP and Animation Shop and it's tools, was written in Version 9, feel free to merge layers as when needed, unless otherwise stated

You will need:

Tubes of choice ( one close up ) I am using the work of Jose Cano, you will need a licence to use his work from My Psp Tubes

My supplies here Pentacom - dot and cross

Open a new transparent image 550x250
select 2 colours from the tubes you are using and set to 'forground-background' gradient, settings: angle-36, repeat-1, style-linear and flood fill

open the close up tube and paste as a new layer > duplicate and mirror until the background is covered > hide the background and merge visible > unhide background

duplicate the tube layer > adjust > blur > gaussian - 3.0

change blend mode to soft light

on the original layer change the blend mode to luminance legacy

hide background layer and merge visible then unhide background layer > blend mode luminance legacy

lower opacity to around 60

set your background to white and foreground to null and select the rectangle preset shape tool > line set to diamond and draw a rectangle (width 2 ) within your image ( see mine )

convert to raster > select your freehand selection tool set to rectangle and draw over the rectangle you just drew

selections invert and highlight the tube layer > adjust > colorise > hue and saturation > change both numbers to 0 > repeat with the background layer > donot deselect

add a new layer and using your gradient again ( click invert this time ) flood fill the selection > change blend mode to soft light

do not deselect > open the brush layer provided and paste as a new layer > invert > delete ( incase any excess ) > select none

lower the opacity to around 36

open your main tube and paste as a new layer and position add a drop shadow of choice

select your freehand selection tool set to rectangle and draw out a vertical rectangle on the right hand side ( see mine ) highlight the tube layer > adjust > colorize > hue and saturation > set both numbers to 0 > repeat this with the background layer

effects > plugins > pentacom > dot n cross and apply default settings

selection > modify > select selection borders > both sides checked > 2

add new layer > flood fill with white > lower opacity to around 50

type your text in this box

add copyrights > your mark and merge layers visible

copy and paste into animation shop > insert image effect > settings: effect length 2.0 - frames per sec 10 - click ok

view animation and save as a .gif

If you have any questions or comments regarding this tutorial or would like me to display
your creation on my blog, please leave me a comment below or write a message
in my Chat Box, alternatively you can email me at clare_33@live.co.uk

Dead Sexy ~ Tutorial

2010-09-12T09:33:00.007+01:00

This tutorial was written by me on 12th September 2010 It assumes you have working knowledge of PSP and Animation Shop and it's tools, was written in Version 9, feel free to merge layers as when needed, unless otherwise stated

You will need:

Template370 by Missy which you can download from Divine Intentionz

My Supplies Here

Eye Candy Impact ~ Gradient Glow

Tube of choice, I am using the work of Elias Chatzoudis, you will need a licence to use his work from My psp Tubes

Open the template > duplicate and close the original

Image > canvas size > 700 x 700 ( we will crop later )

click on the circle layer in your palette > selections > select all > selections > float > selections > defloat
open paper1 and paste as a new layer > selections > invert and hit delete
delete the original circle layer
add a small gradint glow to the circle

click on frameback in pallete > selections > select all > selections > float > selections > defloat
open paper2 and paste as a new layer > selections > invert and hit delete
delete the original layer

highlight the frame layer in your pallete > adjust <> hue and saturation and change both numbers to 0

repeat the above step with frame4 and frame3

click on back in layer pallette and selections > float > selections > defloat > open paper1 and paste as a new layer > selections > invert and hit delete > delete the original layer

selections > invert > open tube and paste as a new layer > position > invert ad hit delete

repeat the above steps with the other back layer

merge down the 2 wordarts together > adjust > colorize > hue and saturation > same as before

click on the stars layer > colorize > hue and saturation > same as before

highlight frameback3 in your pallette > selections > select all > selections > float > selections > defloat > open your tube again and paste as a new layer > invert and hit delete > select none then change the blend mode to luminance legacy

repeat with frameback4

open sexy charm and paste as a new layer > image > resize > 80% and position in the centre below the 2 frames > effects > 3d > drop shadow of choice

use your selection tool to erase any overhangs from the sides

open your main tube and paste as a new layer > drop shadow

add the same gradient glow to the film strips and to the word art

add your copyrights and your mark > crop and resize 85% all layer

merge visible all layers and paste into animation shop

duplicate your tag until you have 16 frames > open the twink

click on frame 1 of the twink > edit > select all > click on frame 1 of the tag > edit select all

click on frame1 of the twink and hold and drag onto frame 1 of the tag, when you have it positioned release the mouse button and now you will have a twink on your tag

add as many as you like > when happy > view aniamtion and save as a .gif

hi all..... update

2010-09-08T20:23:00.002+01:00

Hi all :) just want to apologise for not being here much, reason being,... I have got myself a new job, and I love it.... i am hopefully ( once in a routine ) will get back to giving you all sometime to work with ... thanks for sticking with me.... love to you all ♥

Lilac Dreams

2010-07-13T18:25:00.002+01:00

This tutorial was written by me on 12th July 2010 It assumes you have working knowledge of PSPand Animation Shop and it's tools, was written in Version 9, feel free to merge layers as when needed, unless otherwise stated
** feel free to adapt this tutorial using your own scrap kits or supplies **

you will need:
scrap kit 'In Love' bt Lis with you can purchase at Psp Girl Place
4 or 5 tubes of choice,
template159 by Ali, which you can download from her blog here
eye candy 5 impact - gradient glow
xero ~ porcelain

duplicate the template and delete the copyrights
image ~ resize 85% all layers ~ image ~ canvas size 700 x 700 ( we will crop later )
delete raster 3
highlight raster1~ float ~ defloat ~open paper4 ~ paste as a new layer ~invert and hit delete ~ delete orignal layer

highlight raster 2 ~ float ~ defloat ~ choose two colours from the previous paper and select a gradient of chose ~ add a new layer and flood fill ~ delete original layer
merge down the 2 raster6 ~ float ~ defloat and repeat with the gradient but invert it
add a small gradient glow to the circles ~ and the rectangle and the square
move the square down and to the right a bit

highlight the large rectangle again ~ open 4 or 5 tubes of choice and paste as a new layer and position them all, when you are happy merge them together ~ invert and delete
highlight the rectangle again ~ float ~ defloat ~ add a new layer and flood fill with gradient ~ change blend mode to multiply
click on the front square ~ float ~ defloat ~ open your main tube and paste as a new layer ~ invert and delete

duplicate ~ ( top layer tube ) adjust ~ gaussian blur - 3.0 ~ change blend mode to overlay then merge down with the bottom tube layer
xero ~ porcelain with default settings
highlight the circles layer and duplicate twice ~ rename 1,2 and 3
on layer 1 ~ adjust change brightness contrast to: -33 / 10 hit ok
on layer 2 ~ adjust change brightness contrast to: 58 / 10 hit ok
drop shadow 1 2 and 3
drop shadow raster 4

add a new layer ~ send to the bottom and flood fill white
open element6 and paste as a new layer ~ resize 65% ~ drop shadow and position
open element27 and paste as a new layer ~ resize 65% ~ colorize to match your tube and drag to the bottom above the background ~ and position
open another tube ( preferrably a standing one ) position and add a drop shadow
add any text of choice ~ add the copyrights ~ your mark
crop and resize if u want

hide layer 2 and 3 and copy merged and paste into animation shop
hide layer 1 and 3 and copy merged and paste after current frame in animation shop
hide layer 1 and 2 and copy merged and paste after current frame in animation shop
view animation and save as a .gif

If you have any questions or comments regarding this tutorial or would like me to display
your creation on my blog, please leave me a comment below or write a message
in my Chat Box, alternatively you can email me at clare_33@live.co.uk

Nautical Babe

2010-07-13T18:22:00.003+01:00

This tutorial was written by me on 12th July 2010 It assumes you have working knowledge of PSP and Animation Shop and it's tools, was written in Version 9, feel free to merge layers as when needed, unless otherwise stated

You will need template101 by me ( supplied )
tube of choice, I am using the work of Elias Chatzoudis, you will need a licence to use his work from My Psp Tubes
my supplies here
mask of choice
eye candy 5 impact - gradient glow
xero - frittilary

Open the template ~ duplicate and close the original
Image ~ canvas size ~ 600 x 600 ( we will resize later )
delete the copyright layer
highlight black square ~ float ~ defloat ~ add a new layer ~ open paper2 ~ paste into selection ~ select none and delete the original layer

apply your mask to this layer ~ merge group
click on rectangle ~ float ~ defloat ~ add a new layer ~ open paper2 and paste into selection ~ delete the original layer
click on slats ~ float ~ defloat ~ pick a colour from your tube ~ add a new layer and flood fill ~ delete original layer

add a small black glow to the slats and to the rectangle and also to the stars
highlight the rectangle layer again ~ float ~ defloat ~ open tube and paste as a new layer ~ invert and hit delete
change the blend mode to multiply ~ lower opacity to 68
click on the slats layer ~ xero ~ frittilary ~ default settings

open the anchor and paste as a new layer and position ( see mine ) using your magic wand tool ~ click inside the small circle on it and then highlight the slats layer and hit delete and again on the mask layer ~ drop shadow the anchor
open up main tube and paste as a new layer and position ~ drop shadow
open up the wheel and paste as a new layer and position ( see mine ) ~ duplicate and position ~ merge the 2 together ~ drop shadow

open bubbles and paste as a new layer ~ image mirror and position to the right side ~ drag down so it is below the tube
add the copyrights and your mark and crop around the tag ~ resize if you wish
hide all layers that above the red and white striped rectangle ~ merge visible
hide the merged layer ~ unhide the others ~ merge visible
you should now only have 2 layers

copy the bottom layer and paste into animation as a new layer
and duplicate until you have 8 frames of it ~ open the bubbles and position these over the rectangle
go to back to psp and copy the top layer ~ duplicate until you have 8 frames again and paste this onto the bubbles
view animation and save as a .gif

If you have any questions or comments regarding this tutorial or would like me to display
your creation on my blog, please leave me a comment below or write a message
in my Chat Box, alternatively you can email me at clare_33@live.co.uk

Template 100

2010-07-13T18:19:00.001+01:00

You can download this here

Template 99

2010-07-13T18:17:00.001+01:00

You can download this here

Template 98

2010-07-13T18:16:00.002+01:00

You can download this here

Template 97

2010-07-13T18:09:00.002+01:00

You can download this here

Sexy Summer

2010-07-05T08:58:00.010+01:00

This tutorial was written by me on 5th July 2010 It assumes you have working knowledge of PSP and Animation Shop and it's tools, was written in Version 9, feel free to merge layers as when needed, unless otherwise stated
You will need:

Template 82 by Beth which you can download from Blissfully Beth

Scrap Kit ' Summer Feeling' which you can purchase from Bea Creations

Tube Of Choice, I am using the work of Elias Chatzoudis, you will need a licence to use his work from My Psp Tubes

Mask Of Choice, I used mask84 by WSL from Weescotlass

Eye Candy 5 Impact - Gradient Glow

Open the template and duplicate ~ close the original
delete the copyright layer ~ resize all layers 85%
highlight bg layer ~ open paper2 and paste as a new layer ~ apply mask ~ merge group
highlight blue circle frame ~ float ~ defloat ~ open paper16 ans paste as a new layer ~ invert and hit delete ~ delete original layer

add a small gradient glow
highlight grey circle ~ float ~ defloat ~ open paper14 and paste as a new layer ~ invert and hit delete ~ delete the original layer
highlight black circle ~ float ~ defloat ~ open paper8 and paste as a new layer ~ invert and hit delete ~ delete the original layer

add the same gradient glow
merge down 1 and 2
float ~ defloat ~ open paper11 and paste as a new layer ~ invert and hit delete ~ delete the original ~ add the gradient glow

highlight heart ~ float ~ defloat ~ open paper13 and paste as a new layer ~ invert and delete and delete the original layer
highlight the centre circle layer again ~ float ~ defloat ~ open tube and paste as a new layer ~ invert and hit delete
modify ~ contract20 ~ invert and hit delete

duplicate the tube ~ top layer ~ blur ~ gaussian 3.0 ~ change blend mode to overlay ~ merge down with original tube ~ drop shadow
lower opacity to around 70
highlight heart frame ~ float ~ defloat ~ add a new layer ~ and flood fill with a colour from your tube ~ delete original layer

add the gradient glow
delete sexy summer layer
open heartstring01 and paste as a new layer ~ position ~ drop shadow

resize mask layer 85% ~ duplicate ~ flip ~ mirror ~ merge down
open flower05 and paste as a new layer ~ resize 60% and position over the heart ~ drop shadow
highlight the strips ~ effects ~ weave ~ settings: 1, 6, 1, black for both, fill gaps checked

open doddle03 and paste as a new layer ~ position ~ drop shadow
open main tube and paste as a new layer if using the same tube as me, you will need a block style font to make it look like she is leaning on the text ~ i used Big Apple MF ~ drop shadow
add copyrights and your mark ~ crop around tag ~ resize all layers 85%

if you have any questions or comments regarding this tutorial or would like me to display
your creation on my blog, please leave me a comment below or write a message
in my Chat Box, alternatively you can email me at clare_33@live.co.uk

Template 96

2010-07-03T09:15:00.001+01:00

You can download this here

Template 95

2010-07-03T09:14:00.000+01:00

You can download this here

Template 94

2010-07-03T09:13:00.002+01:00

You can download this here

4th July

2010-06-30T08:25:00.006+01:00

This tutorial was written by me on 30th June 2010 It assumes you have working knowledge of PSP and Animation Shop and it's tools, was written in Version 9, feel free to merge layers as when needed, unless otherwise stated
You will need:
Template68 by Punky Butts which you can get here

tube of choice, I am using the work of Elias Chatzoudis, you will need a licence to use his work from My Psp Tubes

Scrap Kit 'Patriotic Blog train' by Monti which you can download here ( click the 'scrap kit' link on the left to go to them

Eye Candy 5 - Impact - Gradient Glow

Eye Candy 4000 - HSB Noise

Open the template and duplicate and close the original ~ delete the copyright layer ~ image - canvas size 600x600 ( crop and resize later )
highlight lg square frame ~ float ~ defloat ~ open paper8 and paste as a new layer ~ invert and delete ~ delete the original layer
highlight large square ~ float ~ defloat ~ open paper stars red ~ paste as a new layer ~ invert and hit delete ~ delete the original layer

merge down left square and right square ~ float ~ defloat ~ open paper19 and paste as a new layer ~ invert and hit delete ~ delete original layer
merge down left and right strip ~ float ~ defloat ~ open paper20 ~ paste as a new layer ~ invert and hit delete ~ delete the original layer
click on centre square ~ float ~ defloat ~ open paper19 ~ paste as a new layer ~ invert and hit delete and delete the original layer

select 2 colours from your tube and select the gradient foreground/background with the following settings: angle-36 / repeats-2 / invert checked
click on star right ~ float ~ defloat ~ add a new layer ~ flood fill ~ delete original
repeat with the star left

merge down the 2 stars together and add a small black glow using eye candy 5 impact
add the same glow to the large red rectangle
highlight top strip ~ float ~ defloat ~ open paper20 and paste as a new layer ~ invert and hit delete ~ delete the original layer and repeat with the bottom strip
add the same glow to both strips

click on the top stars ~ add noise: uniform / 100 / monochrome checked ~ repeat with the bottom stars and the 2 stars in the middle
hightlight all american girl and add the gradient glow as before
open tube and copy and paste as a new layer and position ~ drop shadow
highlight the stars layer that we added the gradient glow to and duplicate twice and name them 1, 2 and 3

click on 1 and go to effects / eye candy 4000 / hsb noise ~ factory settings but change hue variation to 0 ~ ok
click on 2 and repeat but hit random seed once
click on 3 and repeat but hit random seed once
open puddleribbon20 and paste as a new layer ~ resize 85% ~ drop shadow
open starplain and paste as a new layer ~ resize 55% and position over the hsb stars we just made ~ duplicate ~ image ~ mirror

crop around the tag ~ resize 85% all layers ~ add the copyrights and your mark
hide layer 2 and 3 and copy merged and paste into animation shop
hide 1 and 3 and copy merged and paste into animation shop after current frame
hide 1 and 2 and copy merged and paste into animation shop after current frame
view animation and save as a .gif

If you have any questions or comments regarding this tutorial or would like me to display
your creation on my blog, please leave me a comment below or write a message
in my Chat Box, alternatively you can email me at clare_33@live.co.uk

Template 93

2010-06-30T07:38:00.004+01:00

You can download this here

Template 92

2010-06-30T07:38:00.001+01:00

You can download this here

Template 91

2010-06-30T07:37:00.002+01:00

You can download this here

Template 90

2010-06-26T06:44:00.001+01:00

You can download this here

Template 89

2010-06-26T06:38:00.001+01:00

You can download this here

4th July Layout

2010-06-25T11:58:00.003+01:00

With 4th July zooming up fast, thought I'd make a blog template for you all to have if you wish, just click here to download it, all instructions on how to add are within the folder.

If you would like a header making to match, please let me know by either leaving a message in my C Box or emailing me at clare_33@live.co.uk

Weather Friday 25th June 2010

2010-06-25T10:59:00.002+01:00

wow, well finally England is actually getting some awesome weather :)

Frame Set 01

2010-06-25T09:07:00.002+01:00

I have created a selection of 6 'Patriotic' triple frames
You can download these here

Template 88

2010-06-25T09:02:00.001+01:00

You can download this here

Template 87

2010-06-25T08:46:00.002+01:00

You can download this here

Template 86

2010-06-22T10:38:00.002+01:00

You can download this here

Template 85

2010-06-22T10:37:00.002+01:00

You can download this here

American Girl ~ Tutorial

2010-06-22T07:27:00.008+01:00

This tutorial was written by me on 22nd June 2010. It assumes you have working knowledge of PSP and Animation Shop and it's tools, was written in Version 9, feel free to merge layers as when needed, unless otherwise stated

You will need:
Template3 ( from the stars collection of templates ) by Tamie which you can download here
Tube of choice, I am using the work of Jose Cano, you will need a licence to use his work from My psp tubes
My supplies here
Eye Candy 5 - Impact - Gradient Glow
Mask 084 by Weescotlass
Font I used was Bodie MF which you can get here

Open the template and duplicate and close the original
resize all layers 90% > imag canvas size 700 x 700 ( resize and crop later )
delete the copyright layer, text, glittertext, text3, strip and text2 layers
highlight circle > float > defloat > open paper1 and paste as a new layer > invert and delete and delete the original layer

highlight glittercircle > and colorize with: 172 / 159
colorize the glitterstars using the same colours as before
highlight star2 > float > defloat > open paper2 and paste as a new layer > invert and hit delete > delete the original layer

highlight glittercircle and add a small black glow using eye candy 5 impact, repeat with glitterstar, glitterstar2 and stars 2
highlight stars > float > defloat > delete the original > add new layer and flood fill with a colour from your tube
highlight the large circle > float > defloat > open tube and paste as a new layer > invert and hit delete

duplicate the tube on the top one > blur gaussian blur-3 > change blend mode to overlay and merge down with the tube below
change the blend mode to luminance legacy > lower opacity to around 50
highlight background and open paper2 and paste as a new layer > apply mask > merge group

open wordart and paste as a new layer and position ( see mine ) add the fradient glow same settings as before
open july and paste as a new layer and position over the star > add the gradient
open swirl and paste as a new layer and position top left above the mask > duplicate > image mirror > image flip and merge down > drop shadow of choice

open main tube and paste as a new layer and position > drop shadow
open bow and paste as a new layer and position ( see mine ) drag the wordart and the star to the top
crop around your tag > add the copyrights and your mark and resize all layers 85% > merge visible

copy and paste into animation shop and duplicate twice so you have 3 frames
open the bling and copy and paste it onto the glitter star > view animation and save

Template 85

2010-06-21T06:17:00.002+01:00

you can download this here

Template 84

2010-06-21T06:16:00.000+01:00

You can download this here

Template 83

2010-06-21T06:15:00.000+01:00

You can download this here

Template 82

2010-06-21T06:13:00.000+01:00

You can download this here

Template 81 ~ Templates

2010-06-21T06:12:00.002+01:00

You can download this template here

Happy Birthday To You ~ Tutorials

2010-06-19T10:15:00.004+01:00

This tutorial was written by me on June 19th 2010It assumes you have working knowledge of PSP and Animation Shop and it's tools, was written in Version 9, feel free to merge layers as when needed, unless otherwise stated

You Will Need:

* Birthday Template2 by Kristin which you can get from here
* Tube Of Choice, I am using the woek of Elias Chatzoudis, you must have a licence to use his work which you can get from My psp Tubes
* My Supplies here
* Eye Candy 5 Impact - Gradient Glow

Open the template and duplicate and close the original > delete the copyright layer
highlight black circle > float > defloat > open paper1 and paste as a new layer > invert and delete > delete the original layer
highlight pinkcircle > float > defloat > open paper2 and paste as a new layer > invert and delete > delete the original layer

highlight bluecircle > float > defloat > open paper3 and paste as a new layer > invert and delete > delete the original layer
Add a small black glow to all the frame layers and also the word art layer
click on the large circle > float > defloat > open your tube and paste as a new layer > invert and delete > lower opacity to around 60

Open the pin and resize 85% and paste as a new layer and position ( see mine )
use your deform tool to rotate the pin > adjust > sharpen
open gift and resize 65% twice > paste as a new layer > position ( see mine )
open giftbow and resize 25% and paste as a new layer and position ( see mine )
open ribbon and paste as a new layer ( see mine )

add copyrights, your mark and any text you wish
delete the background layer > merge visible > resize all layers 85% and save as a .png

If you have any questions or comments regarding this tutorial or would like me to display
your creation on my blog, please leave me a comment below or write a message
in my Chat Box, alternatively you can email me at clare_33@live.co.uk

Drunk Dial ~ Tutorials

2010-06-19T09:20:00.004+01:00

This tutorial was written by me on 19th June 2010 It assumes you have working knowledge of PSP and Animation Shop and it's tools, was written in Version 9, feel free to merge layers as when needed, unless otherwise stated

You will need:

Template29 by Tamie which you can download from Addictive Templates
Word art by Artmama which you can download here
Tube Of choice, i am using the work of Keith Garvey and you will need a licence to use his work from My psp Tubes
Scrap Kit 'Remember Me' which you can download from Bea Creations

Open the template and duplicate and close the original > delete the copyright layer
Image canvas size > 700 x 700 ( we will resize and crop later )
Highlight Circle2 > float > defloat > open paper6 and paste as a new layer > selections > invert and hit delete on our keyboard > delete the original layer
highlight strips > float > defloat > open paper6 and paste as a new layer > selections > invert and hit delete on your keyboard > delete the original layer
highlight strip2 > float > defloat > open paper6 and paste as a new layer > invert and hit delete on your keyboard > delete the original layer
highlight strip3 > float > defloat > open paper6 and paste as a new layer > invery and hit delete on your keyboard and delete the original layer
highlight smallcircle2 > float > defloat > open paper4 and paste as a new layer > invert and hit delete on your keyboard > delete the original layer
open the wordart and copy the drunk dial layer and paste as a new layer onto your canvas > position ( see mine )
image > resize > all layers 85% > open tube and paste as a new layer and position > add a drop shadow of choice
highlight the small circle layer > float > defloat > paste your tube as a new layer > invert and delete
duplicate the tube layer and on the top copy > blur > gaussian blur - 3.0 > change the blend mode to overlay and merge down with the other tube layer > lower opacity to around 50
open flower15 and paste as a new layer and position ( see mine ) > drop shadow
add the copyrights, your mark and any text you wish
resize > all layers 85% and crop around
delete the background layer > merge visible and save as a .png

if you have any questions or comments regarding this tutorial or would like me to display
your creation on my blog, please leave me a comment below or write a message
in my Chat Box, alternatively you can email me at clare_33@live.co.uk

USA Soccer Babe ~ Tutorial

2010-06-17T11:06:00.015+01:00

This tutorial was written by me on 17th June 2010 It assumes you have working knowledge of PSP and Animation Shop and it's tools, was written in Version 9, feel free to merge layers as when needed, unless otherwise stated
You will need:
The awesome 'USA' scrap kit by tamie, which can be downloaded from Addictive Pleasures
Tube Of choice, I am using the work of Elias Chatzoudis and you will need a licence to use his work from My psp Tubes
Eye Candy Impact 5 - Gradient Glow
Eye Candy 4000 - hsb Noise

Open a new transparent image 600 x 600 ( crop later ) flood fill white
open frame4 and paste as a new layer > resize > 65% > all layers unchecked
click inside using your magic wand tool > expand > 3 > open paper3 and paste as a new layer > invert and delete and drag below the frame layer
click inside the frame again > expand 3 > open tube and paste as a new layer > invert and delete >invert and again paste the tube again but mirrored > invert and delete > select none

merge down the 2 tube layers and change blend mode to luminance
Hide the background layer and merge visible > resize 75% and move to the bottom a bit ( see mine )
open goalpost and resize 75% and paste as a new layer behind the image u just made
open main tube and paste as a new layer > drop shadow of choice
open flag and resize 75% > paste as anew layer and position ( see mine )

open text2 and paste as a new layer > resize 75% and paste as a new layer and position
( see mine )
effects > eye candy 5 -impact > add small black gradient glow
open flag and paste as a new layer and position behind the goal post > drop shadow
open fireworks and paste as a new layer and position behind ( see mine )
duplicate twice and rename 1, 2 and 3
click on layer 1 add noise > settings: uniform, monochrome - 40
click on layer 2 add noise > same but 45
click on layer 3 add noise > same but 50

click on the wordart and duplicate twice and rename these also 1, 2 and 3
click on 1 and go to eyecandy - hsb noise and use default settings
click on 2 and repeat but change the random seed
click on 3 and repeat but change the random seed
add the copyright and your mark and any text you like
click on the background layer > open paper8 and paste as a new layer > apply mask of choice
hide both 2 and 3's and copy merged into animation shop
unhide 1's
hide both 1 and 3's and copy merged and paste after current frame in animation shop
unhide 2's
hide 1 and 2's and copy merged and paste after current frame in animation shop
view animation and save as a .gif

If you have any questions or comments regarding this tutorial or would like me to display
your creation on my blog, please leave me a comment below or write a message
in my Chat Box, alternatively you can email me at clare_33@live.co.uk

World Cup ~ Tutorials

2010-06-13T16:25:00.015+01:00

This tutorial was written by me on June 13th 2010 It assumes you have working knowledge of PSP and Animation Shop and it's tools, was written in Version 9, feel free to merge layers as when needed, unless otherwise stated

You will need:

My template here

Poser Tubes by Pspgirl, which you can download from here

My Supplies here

Eye Candy 5 - Impact - gradient glow

xero - fritilary

Open the template > duplicate and close the original > delete copyright layer > image canvas size 650 x 650 ( crop later )

click on blk square > float > defloat > open paper1 and paste as a new layer > invert and delete > delete the original layer > effects impact - glow (small black glow)

click on blk square > effects > xero fritilary > settings of choice > selections > select all > float > defloat > add a new raster layer and flood fill black > drag below frit layer and lower opacity to around 50

while selected > paste tube as a new layer > invert and delete > duplicate tube > blur > gaussian 3 > change blend mode to over layer > merge down with original tube layer > lower opacity to 60

open soccer and paste as a new layer > resize 85% and drag down to the bottom

click on the circle layer again > flost > defloat > open soccerball > effects > mura copies :settings, encircle-12/50/50/0/100/-25/100/0/100/0/0/30/0> invert > delete > select none

change the blend mode to hard light

click on blk frame > select all > float > defloat > add new layer and flood fill black > delete original > gradient glow > same asettings as before

again activate the circle layer > open tube > mirror > float > defloat > invert and delete on tube layer > change blend mode to luminance legacy and lower opacity to around 60

open mask layer and paste as a new layer and place to the left a bit > duplicate > image mirror and merge down > duplicate > flip > rotate > free 90 > left or right > resize 85%

open tube and paste as a new layer and position > drop shadow
open soccerball again and paste as a new layer > resize 65% and position > drop shadow

image > resize > all layers 85% > add copyrights , your mark and any text you like
merge visible > save as a .png

If you have any questions or comments regarding this tutorial or would like me to display
your creation on my blog, please leave me a comment below or write a message
in my Chat Box, alternatively you can email me at clare_33@live.co.uk

Template 80 ~ Templates

2010-06-13T16:09:00.002+01:00

You can download this here

Template79 ~ Templates

2010-06-12T11:24:00.002+01:00

You can download this here

Shoooooot ~ Tutorials

2010-06-12T10:50:00.013+01:00

This tutorial was written by me on 12th June 2010, It assumes you have working knowledge of PSP and Animation Shop and it's tools, was written in Version 9, feel free to merge layers as when needed, unless otherwise stated
You will Need:

Tube Of choice, I am using the work of Elias Chatzoudis and you will need a licence to use his work from My Psp Tubes
My Template here
My Supplies here
Fonts Sports Night ( supplied )
Eye Candy 4000 - Gradient Glow
*************************************************************************8

Open the template and duplicate and close the original > delete the copyright layer > image > canvas size > 700 x 700 ( crop later )
using your magic wand click inside blkframeinner1 > modify > expand 2 > open paper2 and paste as a new layer > invert and delete > delete the original
repeat with blkframeinner2

click inside blkframe1 with your magic wand > open tube and paste as a new layer > invert and delete > duplicate tube > blur > gaussian 3 > change blend mode to overlay and merge down with the original tube > repeat with the other frame
click on grey circle > selections > float > defloat > open paper1 and paste as a new layer > invert and delete > delete the original

click on the red circle you just made > selections > float > defloat > paste your tube as a new layer > invert and delete > change the blend mode to soft light and lower the opacity to around 80
open your main tube and paste as a new layer and position > drop shadow
set your foreground and background to black and draw out a rectangle ( see mine ) convert to raster
type your text > I typed England > create as vector so you can stretch it to fit your rectangle > convert to raster > effects > gradient glow and add a small red glow to your text
merge down to your rectangle > add the same glow to the rectangle > add same glow to the 2 black frames also

add the copyrights, your mark and your text > merge visible > crop > resize 85% all layers
copy and paste into animation shop > open the football
add the football to your tag > view and save as a .gif

If you have any questions or comments regarding this tutorial or would like me to display
your creation on my blog, please leave me a comment below or write a message
in my Chat Box, alternatively you can email me at clare_33@live.co.uk

Template 78

2010-06-12T10:47:00.003+01:00

You can download this here

Template 77 ~ Templates

2010-06-12T09:53:00.002+01:00

You can download this here

Fathers Love ~ Scrap Kits

2010-06-03T12:09:00.003+01:00

Kit Includes:

10 papers

10 frames

27 elements

You can download this here

Template 76

2010-06-03T12:08:00.001+01:00

You can download this here

Template75 ~ Templates

2010-06-03T12:07:00.001+01:00

You can download this here